NEC 70GX2-BK MultiSync 70GX2 & 90GX2 User Manual - Page 18

Specifications Monitor MultiSync® Specifications 90GX2 Notes LCD Module Diagonal : Viewable Image Size : Native Resolution (Pixel Count) : Input Signal Video : Sync : Display Colors Maximum Viewing Angles Synchronization Range Resolutions Supported Left/Right : Up/Down : Horizontal : Vertical : Active Display Area USB Hub Power Supply Current Rating Dimensions Horizontal : Vertical : I/P: Port: Load Current: Weight Environmental Considerations Operating Temperature : Humidity : Altitude : Storage Temperature : Humidity : Altitude : 19.0 inch 19.0 inch 1280 x1024 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.294 mm dot pitch; 400cd/m2 white luminence; 700:1 contrast ratio, typical ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI-D Separate sync. TTL Level Positive/Negative Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Composite sync. Positive/Negative*2 Sync on Green (Video 0.7Vp-p and Sync. Negative 0.3Vp-p)*2 16,777,216 Dependent on display card used. 85°/85° (CR>5) 85°/70° (CR>5) 31.5 kHz to 81.1 kHz 56.0 Hz to 75.0 Hz Automatically Automatically 720 x 400*1 VGA text Some systems may not support all 640 x 480*1 @ 60 Hz to 75 Hz modes listed. 800 x 600*1 @ 56 Hz to 75 Hz 832 x 624*1 @ 75 Hz 1024 x 768*1 @ 60 Hz to 75 Hz 1152 x 864*1 @ 75 Hz 1152 x 870*1 @ 75 Hz 1280 x 1024 @ 60 Hz to 75 Hz NEC DISPLAY SOLUTIONS cites recommended resolution at 60 Hz for optimal display performance. 376.3 mm/14.8 inches 301.1 mm/11.9 inches USB Specification Revision 2.0 Upstream 1 Downstream 4 Maximum 0.5A per port 100 - 240 V~ 50/60 Hz 1.1-0.55A 412.5 mm (W) x 407.3 mm (H) x 203.0 mm (D) 16.2 inches (W) x 16.0 inches (H) x 8.0 inches (D) 6.5 kg 14.3 lbs 5°C to 35°C/41°F to 95°F 30% to 80% 0 to 12,000 Feet -10°C to 60°C/-14°F to 140°F 10% to 85% 0 to 40,000 Feet *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done. *2 If your display is not showing a picture of the SOG and Composite sync. signal, please contact our hotline for assistance. NOTE: Technical specifications are subject to change without notice. 16