NEC AS191 AccuSync AS191-BK : user's manual - Page 9
Removing the Base, Connecting a Flexible Arm - monitor base
UPC - 805736032208
View all NEC AS191 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Non-abrasive surface Figure R.1 Figure R.2 Figure R.3 Removing the Base NOTE: Always remove the Base when shipping the LCD. 1. Place monitor face down on a non-abrasive surface (Figure R.1). 2. While using your thumbs, press the bottom tabs upward to unlock. 3. Press the top tabs down to unlock and pull off the Base Stand. Locking tabs Connecting a Flexible Arm This LCD monitor is designed for use with a flexible arm. Please use screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be mounted to an arm which, guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark). NOTE: The mounting stand shall be able to sustain at least 21 kg and UL certified. Specifications 4-SCREWS (M4) (MAX depth: 10 mm) If use other screw, check depth of hole. 12 mm M4 4 x 12 mm with lock washer and flat washer 100 mm Thickness of Bracket (Arm) 2.0 ~ 3.2 mm Tighten all screws 100 mm Weight of LCD assembly: AS191: 4.0 kg (MAX) English-7