NEC AS231WM-BK AccuSync AS231WM-BK : user's manual - Page 13
Specifications - hdcp
UPC - 805736033809
View all NEC AS231WM-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English Specifications Monitor Specifications AccuSync AS231WM Monitor Notes LCD Module Diagonal: 58.4 cm/23.0 inches Viewable Image Size: 58.4 cm/23.0 inches Native Resolution (Pixel Count): 1920 x 1080 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.265 mm dot pitch; 250 cd/m2 white luminance, 1000:1 contrast ratio, typical. Input Signal Video: Sync: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI-D with HDCP Separate sync.TTL Level (Positive/Negative) Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Display Colours 16,7 M Depends on display card used. Synchronization Range Horizontal: 31.5 kHz to 82.3 kHz Vertical: 56 Hz to 75 Hz Automatically Automatically Viewing Angle Left/Right: -85°/+85° (CR>10) Up/Down: -75°/+85° (CR>10) Resolutions Supported Landscape: 720 x 400*1: VGA text Some systems may not support all 640 x 480*1 at 60 Hz to 75 Hz modes listed. 800 x 600*1 at 56 Hz to 75 Hz 832 x 624*1 at 75 Hz 1024 x 768*1 at 60 Hz to 75 Hz 1152 x 870*1 at 75 Hz 1280 x 960*1 at 60 Hz to 75 Hz 1280 x 1024*1 at 60 Hz to 75 Hz 1440 x 900*1 at 60 Hz to 75 Hz 1680 x 1050*1 at 60 Hz Recommended resolution is 60 Hz for 1920 x 1080 at 60 Hz optimal display performance. Active Display Area Horizontal: 509.2 mm Vertical: 286.4 mm Speakers Practical Audio Output: 1.0 W + 1.0 W Power Supply 100 - 240 V ~ 50/60 Hz Current Rating 0.60 - 0.35 A (with Audio) Power Maximun Operation: 33 W Consumption Normal Operation: 22 W Dimensions Landscape: 546.0 mm (W) x 378.6 mm (H) x 221.8 mm (D) 21.5 inches (W) x 14.9 inches (H) x 8.7 inches (D) Weight 5.4 kg (11.9 lbs) Environmental Considerations Operating Temperature: Humidity: Altitude: Storage Temperature: Humidity: Altitude: 5°C to 35°C/41°F to 95°F 20% to 80% 0 to 2,000 m/0 to 6,562 Feet -10°C to 60°C/14°F to 140°F 10% to 85% 0 to 12,192 m/0 to 40,000 Feet *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done. NOTE: Technical specifications are subject to change without notice. English-11