NEC AS231WM-BK AccuSync AS231WM-BK : user's manual - Page 9

English Non-abrasive surface Figure R.1 Figure R.2 Figure R.3 Removing the Base Stand NOTE: Always remove the Base Stand when shipping the LCD. 1. Place monitor face down on a non-abrasive surface (Figure R.1). 2. While using your thumbs, press button downward to unlock base stand. 3. Pull out the unlocked Base Stand. Connecting a Flexible Arm This LCD monitor is designed for use with a flexible arm. Please use screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be mounted to an arm which, guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark). NOTE: The mounting stand shall be able to sustain at least 20.0 kg and UL certified. 12 mm M4 4 x 12 mm with lock washer and flat washer Thickness of Bracket (Arm) 2.0 ~ 3.2 mm 100 mm Tighten all screws Specifications 4-SCREWS (M4) (MAX depth: 10 mm) If use other screw, check depth of hole. 100 mm Weight of LCD assembly: 5.0 kg (MAX) English-7