NEC PX-50XR5A 42XR4/50XR5/61XR4 UM - Page 5
Connecting the cords
View all NEC PX-50XR5A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
5 Fully tighten the four partially tightened screws. *Push the speaker against the monitor while driving the screw. L 42 3 L 42 R 42 WARNING - ˔Do not move the monitor by holding onto the speakers which have been mounted to the monitor. R This could cause the monitor to fall and result in injury. 42 ˔Fasten the screws securely. Failing to do so could cause the speakers to fall and result in injury. Connecting the cords Turn off the power of all connected units before connecting the cords. Connect the monitor's SPEAKER R and L terminals with the speakers' terminals using the L included connection cords. 42 There is polarity ʴʵ with the conductor of each connection cord. Connect each conductor to the correct terminal. R 42 3*()5 -&'5 3 L 42 Black Red Hold down the button of the speaker terminal with your finger, insert the conductor of the - connection cable, and release your finger. Cord Clamper R Peel off the protective tape from the back of the clamper, then 42 mount the clamper in the desired position and clamp the cords together. 5