NEC PX-50XR5A 42XR4/50XR5/61XR4 UM - Page 6

Mounting to a 50-inch Plasma Monitor The speakers are marked R for use on the right side and L for use on the left side. At the time of mounting, check for the letter R or L appearing on the label at the back of the speaker, and on the mounting fittings. 1 Attach the cushions to the sides of the speakers in the positions indicated on the diagram. 2 Arrange the speakers as illustrated in the diagram below (so that the speaker terminals are at the bottom). Attach the R mounting fitting to the speaker having an R marked on the speaker label. Attach so that the guide pins of the speaker enter the holes of the mounting fitting as illustrated in the diagram below. Fasten with the included M4 X 10 screws. R3 LCushions M4 x 10 L L 50 L - R R 50 Speaker terminal R 50 Guide pins R3 Speaker terminal R R 50 L L 50 3 Partially tighten the included M4 X 20 screws in the screw holes on the top of the monitor. 4 Hook the mounting fittings of the top portion of the speaker to the provisionally fastened screws. Next, align the holes of the speaker mounting fitting with the screw holes located at the bottom of the monitor and provisionally fasten with the included M4 X 20 screws. L 50 .ʷ 3 L 50 R 50 R 50 - R 50 R 50 6