NEC PX-61XM2A 42VP4/42XM2/50XM3/61XM2 - Page 29
Image Adjust Settings Menu
View all NEC PX-61XM2A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setting the allocation of the audio connectors Setting the AUDIO 1, 2, and 3 connectors to the desired input. Example: Setting "AUDIO INPUT1" to "VIDEO 2" 1. On the MAIN MENU, select "AUDIO", then press the MENU/ENTER button. The "AUDIO" screen appears. 2. Use the v and w buttons to select "AUDIO INPUT1". 3. To set the AUDIO INPUT1 to "VIDEO2"... Use the ᮤ and ᮣ buttons to select "VIDEO2". The mode switches as follows each time the ᮤ or ᮣ button is pressed: The available sources depend on the setting of "BNC INPUT". RGB: → VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1← →RGB3 ↔RGB2 ↔RGB1 ← COMP.: → VIDEO1 ↔ VIDEO2 ↔ VIDEO3↔ HD/DVD1← →RGB3 ↔RGB1 ↔HD/DVD2 ← BASS TREBLE BALANCE AUDIO INPUT1 AUDIO INPUT2 AUDIO INPUT3 AUDIO : VIDEO2 : HD/DVD1 : RGB1 SEL. ADJ. EXIT RETURN Information Ⅵ AUDIO INPUT A single audio input cannot be selected as the audio channel for more than one input terminal. Ⅵ Restoring the factory default settings Select "ALL RESET" under the OPTION1 menu. Note that this also restores other settings to the factory defaults. Image Adjust Settings Menu Adjusting the Position, Size, Fine Picture, Picture Adj The position of the image can be adjusted and flickering of the image can be corrected. Example: Adjusting the vertical position in the normal mode 1. On the MAIN MENU, select "IMAGE ADJUST", then press the MENU/ENTER button. The "IMAGE ADJUST" menu appears. Default settings (when RGB/PC is selected) IMAGE ADJUST ASPECT MODE : NORMAL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. SEL. ADJ. EXIT RETURN * The settings on the IMAGE ADJUST menu are not preset at the factory. To select a mode ... Use the ᮤ and ᮣ buttons to select a mode. The mode switches as follows each time the ᮤ or ᮣ button is pressed: NORMAL ↔ FULL * The mode can also be switched by pressing the "WIDE" button on the remote control. 2. To adjust the vertical position ... Use the v and w buttons to select "V-POSITION". IMAGE ADJUST ASPECT MODE : NORMAL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. SEL. ADJ. EXIT RETURN 3. Adjust using the ᮤ and ᮣ buttons. V-POSITION * If neither the ᮤ or ᮣ button is pressed within 5 seconds, the current setting is set and the previous screen reappears. To continue making other computer image adjustments ... Repeat from step 2. 22