Home » Netgear Manuals » Bridges & Routers » Netgear AC1200-WiFi » Manual Viewer

Netgear AC1200-WiFi User Manual - Page 37

Set Up an IPv6 DHCP Internet Connection

View all Netgear AC1200-WiFi manuals

Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

AC1200 WiFi Router Model R6120 • Auto Config. This is the default setting. This setting specifies how the router assigns IPv6 addresses to the devices on your home network (the LAN). 8. In the IPv6 Address/Prefix Length fields, specify the static IPv6 address and prefix length of the router's LAN interface. If you do not specify an ID here, the router generates one automatically from its MAC address. 9. Click the Apply button. Your settings are saved. Set Up an IPv6 DHCP Internet Connection To set up an IPv6 Internet connection with a DHCP server: 1. Launch a web browser from a computer or mobile device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > IPv6. The IPv6 page displays. 5. From the Internet Connection Type menu, select DHCP. The IPv6 page displays. The router automatically detects the information in the following fields: • Router's IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the router's WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. • Router's IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the router's LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. Specify Your Internet Settings 37 User Manual

Section	Page
Contents	3
1. Hardware Overview of the Router	8
Unpack Your Router	9
LED Descriptions	11
Ports, Buttons, and Connectors on the Back Panel	11
Router Label	13
Position the Router	13
Cable Your Router	14
2. Connect to the Network and Access the Router	16
Connect to the Router	17
Connect to the Router Through an Ethernet Cable	17
Join the WiFi Network of the Router	17
Manual Method	17
Wi-Fi Protected Setup Method	18
Types of Logins	19
Use a Web Browser to Access the Router	19
Automatic Internet Setup	19
Log In to the Router	21
Change the Language	21
3. Specify Your Internet Settings	22
Use the Internet Setup Wizard	23
Manually Set Up the Internet Connection	23
Specify an Internet Connection Without a Login	23
Specify an Internet Connection That Uses a Login and PPPoE Service	25
Specify an Internet Connection That Uses a Login and PPTP Service	27
Specify an Internet Connection That Uses a Login and L2TP Service	28
Specify an IPv6 Internet Connection	30
IPv6 Internet Connections and IPv6 Addresses	30
Use Auto Detect for an IPv6 Internet Connection	31
Use Auto Config for an IPv6 Internet Connection	32
Set Up an IPv6 6to4 Tunnel Internet Connection	34
Set Up an IPv6 Pass-Through Internet Connection	35
Set Up a Fixed IPv6 Internet Connection	36
Set Up an IPv6 DHCP Internet Connection	37
Set Up an IPv6 PPPoE Internet Connection	38
Manage the MTU Size	40
MTU Concepts	40
Change the MTU Size	41
4. Control Access to the Internet	43
Enable access control to allow or block access to the Internet	44
Manage network access control lists	45
Use Keywords to Block Internet Sites	46
Set Up Blocking	46
Remove a Keyword or Domain From the Blocked List	47
Remove All Keywords and Domains From the Blocked List	48
Specify a Trusted Computer	48
Set Up a Schedule for Keyword Blocking and Outbound Firewall Rules	49
5. Manage the Basic WiFi Network Settings	51
Manage the Basic WiFi Settings and WiFi Security of the Main Network	52
View or Change the Basic WiFi Settings and WiFi Security Settings	52
Configure WEP Legacy WiFi Security	58
Configure WPA/WPA2 Enterprise WiFi Security	60
Use WPS to Add a Device to the WiFi Network	62
Use WPS With the Push Button Method	62
Use WPS With the PIN Method	63
Manage the Basic WiFi Settings and WiFi Security of the Guest Network	64
Enable or Disable the WiFi Radios	68
6. Share a Storage Device Attached to the Router	69
USB Device Requirements	70
Connect a USB Device to the Router	71
Access a Storage Device Connected to the Router	71
Access the Storage Device From a Windows-Based Computer	72
Access the Storage Device From a Mac	72
Map a USB Device to a Windows Network Drive	73
Manage Access to a Storage Device	74
Enable FTP Access Within Your Network	76
View Network Folders on a Device	76
Add a Network Folder on a Storage Device	77
Change a Network Folder, Including Read and Write Access, on a USB Drive	78
Approve USB Devices	79
Safely Remove a USB Device	80
7. Share a USB Printer	82
Install the printer driver and cable the printer	83
Download the ReadySHARE printer utility	83
Install the ReadySHARE printer utility	83
Print using the NETGEAR USB Control Center	84
8. Manage the WAN and LAN Network Settings	86
View or Change WAN Settings	87
Set Up a Default DMZ Server	88
Manage IGMP Proxying	89
Manage VPN Pass-Through	89
Manage NAT Filtering	90
Manage the SIP Application-Level Gateway	91
Manage the LAN IP Address Settings	92
Manage the Router Information Protocol Settings	93
Manage the DHCP Server Address Pool	94
Manage Reserved LAN IP Addresses	95
Reserve a LAN IP Address	95
Change a Reserved IP Address	96
Remove a Reserved IP Address Entry	96
Disable the Built-In DHCP Server	97
Change the Router’s Device Name	98
Set Up and Manage Custom Static Routes	99
Set Up a Static Route	99
Change a Static Route	101
Remove a Static Route	101
Set Up a Bridge for a Port Group or VLAN Tag Group	102
Set Up a Bridge for a Port Group	102
Set Up a Bridge for a VLAN Tag Group	103
Improve Network Connections With Universal Plug-N-Play	105
9. Manage the Router	107
Update the Firmware of the Router	108
Check for New Firmware and Update the Router	108
Manually Upload New Firmware and Update the Router	109
Change the admin Password	110
Set Up Password Recovery	111
Recover the admin Password	112
Manage the Configuration File of the Router	112
Back Up the Settings	112
Restore the Settings	113
Return the Router to Its Factory Default Settings	114
Use the Reset Button	114
Erase the Settings	115
View the Status and Statistics of the Router	116
View Information About the Router and the Internet and WiFi Settings	116
Display Internet Port Statistics	117
Check the Internet Connection Status	118
Manage the Activity Log	119
View, Email, or Clear the Logs	119
Specify Which Activities Are Logged	120
View Devices Currently on the Network	120
10. Manage the Advanced WiFi Features	122
Set Up a WiFi Schedule	123
Manage the WPS Settings	124
Manage Advanced WiFi Settings	125
Use the Router as a WiFi Access Point Only	126
11. Manage Port Forwarding and Port Triggering	128
Manage Port Forwarding to a Local Server for Services and Applications	129
Forward Incoming Traffic for a Default Service or Application	129
Add a Port Forwarding Rule With a Custom Service or Application	130
Change a Port Forwarding Rule	131
Remove a Port Forwarding Rule	132
Application Example: Make a Local Web Server Public	133
How the Router Implements the Port Forwarding Rule	133
Manage Port Triggering for Services and Applications	134
Add a Port Triggering Rule	134
Change a Port Triggering Rule	136
Remove a Port Triggering Rule	136
Specify the Time-Out for Port Triggering	137
Disable Port Triggering	138
Application Example: Port Triggering for Internet Relay Chat	138
12. Troubleshooting	140
Reboot the Router From Its Web Interface	141
Quick Tips	141
Sequence to Restart Your Network	141
Check Ethernet Cable Connections	142
WiFi Settings	142
Network Settings	142
Troubleshoot With the LEDs	142
Standard LED Behavior When the Router Is Powered On	142
Power LED Is Off or Blinking	143
Power LED Stays Amber	143
Internet or Ethernet LEDs Are Off	143
WiFi LED Is Off	144
You Cannot Log In to the Router	144
You Cannot Access the Internet	145
Check the WAN IP Address	145
Troubleshoot PPPoE	146
Troubleshoot Internet Browsing	147
Changes Are Not Saved	148
Troubleshoot WiFi Connectivity	148
Troubleshoot Your Network Using the Ping Utility	149
Test the LAN Path to Your Router	149
Test the Path From Your Computer to a Remote Device	150
A. Supplemental Information	151
Factory Settings	152