Netgear DG834 DG834 Original Reference Manual - Page 34
Wizard-Detected IP Over ATM Account Setup
UPC - 606449029109
View all Netgear DG834 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Reference Manual for the Model DG834 ADSL Firewall Router Wizard-Detected IP Over ATM Account Setup If the Setup Wizard determines that your Internet service account uses IP Over ATM Classical IP assignment (RFC1577), you will be directed to the menu shown in Figure 3-13 below: Figure 3-13: Setup Wizard menu for IP Over ATM (Classical IP) address 1. Enter your assigned IP Address and Subnet Mask. This information should have been provided to you by your ISP. You need the configuration parameters from your ISP you recorded in "Record Your Internet Connection Information" on page 3-4. 2. Enter the IP address of your ISP's Primary DNS Server. If a Secondary DNS Server address is available, enter it also. DNS servers are required to perform the function of translating an Internet name such as www.netgear.com to a numeric IP address. For a fixed IP address configuration, you must obtain DNS server addresses from your ISP and enter them manually here. 3. Click Apply to save the settings. 4. Click the Test button to test your Internet connection. If the NETGEAR Web site does not appear within one minute, refer to Chapter 7, "Troubleshooting". 3-12 Connecting the Router to the Internet