Netgear DG834 DG834 Original Reference Manual - Page 35
Wizard-Detected Fixed IP (Static) Account Setup
UPC - 606449029109
View all Netgear DG834 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Reference Manual for the Model DG834 ADSL Firewall Router Wizard-Detected Fixed IP (Static) Account Setup If the router determines that your Internet service account uses Fixed IP assignment, you will be directed to the page shown in Figure 3-14 below: Figure 3-14: Setup Wizard menu for Fixed IP address 1. If required, enter the Account Name and Domain Name from your ISP. 2. Choose "Use Static IP Address" or "Use IP Over ATM" (IPoA - RFC1483 Routed) according to the information from your ISP. If you choose IPoA, the router will be able to detect the gateway IP address but you still need to provide the router IP address. 3. Enter your assigned IP Address, Subnet Mask, and the IP Address of your ISP's gateway router. This information should have been provided to you by your ISP. You need the configuration parameters from your ISP you recorded in "Record Your Internet Connection Information" on page 3-4. 4. Enter the IP address of your ISP's Primary DNS Server. If a Secondary DNS Server address is available, enter it also. DNS servers are required to perform the function of translating an Internet name such as www.netgear.com to a numeric IP address. For a fixed IP address configuration, you must obtain DNS server addresses from your ISP and enter them manually here. 5. Click Apply to save the settings. Connecting the Router to the Internet 3-13