Netgear DM111PSP-100NAS DM111PSPv2 User Manual - Page 17
Log In to the Modem, Login and System Information
View all Netgear DM111PSP-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Broadband ADSL2+ Modem DM111PSPv2 • WAN port settings. This is your port address type (PPPoE by default) and ISP login name and password. See Manual Setup (Basic Settings) on page 21 for more information about address types. Login and System Information • Modem login. The modem administrator login name and password as described in Log In to the Modem on page 17. • System information. PC operating system, modem serial number, and WAN Port MAC Address. Log In to the Modem Log in to the modem to view or change settings or to set up the modem. To log in: 1. Type http://192.168.0.1 in the address field of your browser and press Enter to display the login window. You can also enter either of these addresses to access the broadband ADSL2+ modem: http://www.routerlogin.net or http://www.routerlogin.com. admin ******** 2. When prompted, enter admin for the modem user name and password for the modem password, both in lowercase letters. Note: The modem user name and password are probably different from the user name and password for logging in to your Internet connection. See Types of Logins on page 26 for more information. If you do not see the login prompt: 1. Check the LEDs on the modem front panel to make sure that the modem modem is plugged into an electrical outlet, its power is on, and the Ethernet cable between your computer and the modem is connected to an Ethernet port. Modem Internet Setup 17