Netgear FS726T FS726T Hardware manual - Page 6

Features The following list identifies the key features of the NETGEAR ProSafe FS726T Smart Switch. • Twenty-four 10/100 Mbps and two 10/100/1000 Mbps auto-sensing Ethernet switching ports • One SFP GBIC combo Gigabit Ethernet slot for optional fiber connectivity • Automatic detection of SFP GBIC modules • Reset Button. • Factory Defaults Button. • Administrative switch management including: ♦ IEEE 802.1Q Tag VLAN with up to 64 VIDs ranging in 2 to 4K ♦ Port-based VLAN with up to 26 groups, any one port can belong to different VLAN groups ♦ IEEE 802.1p QoS support, 4 priority queues per port ♦ IEEE 802.3ad Link Aggregation support ♦ Web-based management with embedded HTTP server provided ♦ Supports port-setting function which allows user to enable/disable each port, set speed, duplex mode and device follow control ♦ Support Auto-Discovery application program for discovering and managing the switches on the network ♦ Support flash upgrading, configuration backup/restore and factory reset • Full compatibility with IEEE standards: ♦ IEEE 802.3i (10BASE-T) ♦ IEEE 802.3u (100BASE-TX) ♦ IEEE 802.3z/ab (1000BASE-X, 1000Base-T) ♦ IEEE 802.3x (full-duplex flow control) • Auto-sensing and auto-negotiating capabilities for all ports • Auto Uplink™ on all ports to make the right connection • Integrated address Look-Up Engine, supports 8K absolute MAC addresses • Full- and half-duplex functions for all RJ-45 ports • Store-and-Forward transmission to remove bad packets from the network • Active flow control to minimize packet loss/frame drops: ♦ Half-duplex back-pressure control ♦ Full-duplex IEEE 802.3x pause frame flow control • LED indicators for port status monitoring: ♦ Power LED to indicate power on/off status ♦ Link/Act LED to indicate link status and activity ♦ Dual-color Mode LED to indicate speed, activity for Gigabit ports • Flexible installation: ♦ Standalone desktop installation ♦ 19-inch standard rack-mount • Standard 1U case size Page 6 of 19