Netgear FSM726v2 FSM726v2 Setup Manual - Page 106

Dot1x, The RADIUS Server IP Address must be con d first before enabling 802.1x. Otherwise

Get Netgear FSM726v2 - 10/100 Mbps Managed Switch PDF manuals and user guides View all Netgear FSM726v2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 106 highlights

700 Series Software Manual v2.1 Where = The DSCP value, which ranges from 0-63 = The priority associated with the defined DSCP value. The available options are normal and high For example, suppose you want to set DSCP 33 to high, the command to do so would be: FSM726(config)# diffserv 33 high Dot1x The RADIUS Server IP Address must be configured first before enabling 802.1x. Otherwise Port-Based Authentication will not take effect. You can also set a RADIUS server shared secret. The Re-authentication Timer allows the user to specify the time interval between authentication server's checks of users connected to the network. The default time interval is 3600 seconds and the range is from 1 - 65535 seconds. Figure 6-1: Config Dox1x commands Syntax FSM726(config)# dot1x 123.123.123.12 6-14 Command Line Interface

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
700 Series Software Manual v2.1
6-14
Command Line Interface
Where
<DSCP>
= The DSCP value, which ranges from 0-63
<Priority>
= The priority associated with the defined DSCP value. The available options are
normal
and
high
For example, suppose you want to set DSCP 33 to high, the command to do so would be:
FSM726(config)# diffserv 33 high
Dot1x
The RADIUS Server IP Address must be configured first before enabling 802.1x. Otherwise
Port-Based Authentication will not take effect. You can also set a RADIUS server shared secret.
The Re-authentication Timer allows the user to specify the time interval between authentication
server's checks of users connected to the network. The default time interval is 3600 seconds and
the range is from 1 - 65535 seconds.
Figure 6-1:
Config Dox1x commands
Syntax
FSM726(config)# dot1x
123.123.123.12