Netgear FSM750S FSM726 User Manual - Page 118
Save, Restore, Web, Telnet, Use this command enable/disable the web configuration interface. Use
View all Netgear FSM750S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
700 Series Managed Switch User's Guide for Software v2.1 Syntax FSM726(config)# system gateway Where = the IP address of the default gateway Save The save command is used to save the configuration to the 's NVRAM once you have made changes to it. Syntax FSM726(config)# system save Restore The restore command is used to restore all configurations back to factory default value. Please note that this command will cause the switch to reset itself. Syntax FSM726(config)# system restore Web Use this command enable/disable the web configuration interface. Use the No command to disable the web interface. Syntax FSM726(config)# system web Telnet Use this command to enable/disable configuration via telnet. Use the No command to disable the Telnet access. Syntax FSM726(config)# system telnet 6-28 SM-10004-02 Command Line Interface