Netgear FSM750S FSM726 User Manual - Page 41
Main Menu> Advanced> VLANS> VLAN Membership
View all Netgear FSM750S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
700 Series Managed Switch User's Guide for Software v2.1 Figure 4-28: VLAN Administration To add a VLAN, enter a unique numeric VLAN ID and then enter a unique VLAN name. To remove a port or an entire VLAN, just press Ctrl-X anywhere on the line of the VLAN. Main Menu> Advanced> VLANS> VLAN Membership This matrix allows for real time management of up to 64 VLANs. Figure 4-29: VLAN Membership To add a port to a VLAN, position the cursor in the desired matrix location and toggle the options with the SPACE bar. A 'U' or 'T' will be displayed for each port assigned to the VLAN, where 'U' stands for untagged and 'T' for tagged. If a port is an untagged member of a VLAN, the VLAN tag will be striped from the frame before it is sent out that port. If the port is a tagged member of a VLAN, the VLAN tag will stay in the frame when it is sent. A '_' space indicates that the port is not a member of the particular VLAN, and will not receive or forward any traffic for that VLAN. VLAN tagging is a standard set by the IEEE to facilitate the spanning of VLANs across multiple switches. (Reference: Appendix B and IEEE Std 802.1Q-1998 Virtual Bridged Local Area Networks). Main Menu> Advanced> VLANS> VLAN Ports All untagged packets entering the switch will by default be tagged with the ID specified by the port's PVID. Administration Console Telnet Interface SM-10004-02 4-21