Netgear GS108T GS108T Setup Manual - Page 112
Factory Default, Apply, Warning - and dhcp
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
GS108T Smart Switch Software Administration Manual Factory Default The Factory Default screen lets you reset the switch to its factory default values: 1. Select Maintenance > Reset > Factory Default. A screen similar to the following displays. Figure 6-12 2. Under Factory Default, select the check box. Warning: If there is no DHCP server on the network, the IP address becomes 192.168.0.239. Warning: The password returns to the factory default password. 3. Click Apply to restart the switch. Note: You can also use the Factory Defaults button on the front panel of the Smart Switch to reset the switch to its factory default values. 6-18 Monitoring, Maintenance, and Help v1.0, December 2007
GS108T Smart Switch Software Administration Manual
6-18
Monitoring, Maintenance, and Help
v1.0, December 2007
Factory Default
The Factory Default screen lets you reset the switch to its factory default values:
1.
Select Maintenance > Reset > Factory Default. A screen similar to the following displays.
2.
Under Factory Default, select the check box.
3.
Click
Apply
to restart the switch.
Figure 6-12
Warning:
If there is no DHCP server on the network, the IP address becomes
192.168.0.239.
Warning:
The password returns to the factory default password.
Note:
You can also use the Factory Defaults button on the front panel of the Smart Switch
to reset the switch to its factory default values.