Netgear GS724Tv3 GS716Tv2/GS724Tv3 Software Admin Manual - Page 107
IGMP Snooping Querier Configuration, Switching, Multicast, IGMP Snooping Querier, IGMP Snooping
View all Netgear GS724Tv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual IGMP Snooping Querier Configuration Use this page to enable or disable the IGMP Snooping Querier feature, specify the IP address of the router to perform the querying, and configure the related parameters. To access this page: 1. Click Switching Multicast IGMP Snooping Querier IGMP Snooping Querier Configuration in the navigation tree. Figure 3-27 Table 3-25. IGMP Snooping Querier Configuration Fields Field Description Querier Admin Mode Select the administrative mode for IGMP Snooping for the switch from the menu. The default is Disable. Snooping Querier Address Specify the Snooping Querier Address to be used as source address in periodic IGMP queries. This address is used when no address is configured on the VLAN on which the query is being sent. IGMP Version Query Interval Specify the IGMP protocol version used in periodic IGMP queries. Specify the time interval in seconds between periodic queries sent by the snooping querier. The Query Interval must be a value in the range of 1-18000 seconds. The default value is 60. Querier Expiry Interval Specify the time interval in seconds after which the last querier information is removed. The Querier Expiry Interval must be a value in the range of 60-300 seconds. The default value is 60. 2. Click Refresh to redisplay the page with the latest information from the switch. Configuring Switching Information v1.0, July 2009 3-43