Netgear GS724Tv3 GS716Tv2/GS724Tv3 Software Admin Manual - Page 134
Security, Management Security, RADIUS, Accounting Server, Configuration, Refresh, Delete, Cancel
View all Netgear GS724Tv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual 1. Click Security Management Security, and then click the RADIUS Accounting Server Configuration in the navigation tree. Figure 5-4 Table 5-5. RADIUS Accounting Server Configuration Fields Field Description Accounting Server Address Enter the IP address of the RADIUS accounting server to add. Port Identifies the authentication port the server uses to verify the RADIUS accounting server authentication. The port is a UDP port, and the valid range is 0-65535. Secret Configured Indicates whether the shared secret for this server has been configured. The Secret field is only available if you select Yes. Secret Specifies the shared secret to use with the specified accounting server. This field is only displayed if the user has READWRITE access. Accounting Mode Use the menu to enable or disable the RADIUS accounting mode. 2. Click Refresh to update the page with the most current information. 3. To delete a configured RADIUS Accounting server, click Delete. 4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 5-8 Managing Device Security v1.0, July 2009