Netgear GSM4248P Product Datasheet - Page 37
IPv4 Unicast Routes in Default IPv4 Basic SDM Template
View all Netgear GSM4248P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Datasheet | M4250 series AV Line Managed Switches Other Metrics Forwarding mode Addressing Address database size Number of VLANs Number of multicast groups filtered (IGMP) Number of Link Aggregation Groups (LAGs) Number of hardware queues for QoS Number of routes IPv4 IPv6 Store-and-forward 48-bit MAC address 16K MAC addresses 4,093 VLANs (802.1Q) simultaneously 4K total (2,048 IPv4 and 2,048 IPv6) 8 LAGs with up to 8 ports per group 8 queues 802.3ad / 802.1AX-2008 894 IPv4 Unicast Routes in Default IPv4 Basic SDM Template 126 IPv6 Unicast Routes in Default IPv4 Basic SDM Template SDM (System Data Management, or switch database) templates allow for granular system resources distribution depending on IPv4 or IPv6 applications Number of static routes IPv4 64 IPv6 64 RIP application route scaling IPv4 32 in Default IPv4 Basic SDM Template Number of IP interfaces (port or VLAN) 128 Jumbo frame support up to 12KB packet size Acoustic noise Testing method SPL (Sound Pressure Level) Fan management Fan Off mode @ 25° C ambient (77° F) Maximum Conditions: M4250-9G1F-PoE+ @ 25°C ambient (77°F) Following the ISO-7779 standard. Bystander Mode. Chamber Temp 25ºC during testing unless noted otherwise. Full, 100%, Data and PoE loaded. Worst case. dBA values are SPL (Sound Pressure Level) values, testing following the ISO-7779 standard Three modes are configurable using the AV GUI or the CLI: Fan Off mode, Quiet mode (default), and Cool mode PoE Power Load Internal Sensors Case Temperature (Top) Fan Duty Acoustic Noise 110W (fanless) 50ºC 35.3ºC N/A 0dBA M4250-8G2XF-PoE+ M4250-10G2F-PoE+ M4250-10G2XF-PoE+ M4250-10G2XF-PoE++ M4250-26G4F-PoE+ M4250-26G4F-PoE++ M4250-26G4XF-PoE+ M4250-40G8F-PoE+ M4250-40G8XF-PoE+ M4250-40G8XF-PoE++ M4250-12M2XF M4250-16XF 180W (RJ45 only, no SFP+) 80W (all ports can be used) 90W (all ports can be used) 45W (all ports can be used) 45W (no SFP) Not Supported 45W (8 ports PoE+, no SFP+) 30W (8 ports PoE+, no SFP) Not Supported Not Supported (4 ports 2.5G used in block 1-6 and 4 ports 2.5G used in block 7-12, no SFP+) (8 ports SFP+) 0dBA / 37.4ºC Case Temp