Netgear GSM7324 FSM7326P User Manual - Page 39

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver- The parameters for a command might include mandatory values, optional values, or keyword choices. Table 2-1 describes the conventions this document uses to distinguish between value types. Table 2-1. Parameter Conventions Symbol Example Description angle brackets [] square brackets {} curly braces | Vertical bars [{}] Braces within square brackets [value] {choice1 | choice2} choice1 | choice2 [{choice1} choice2}] Indicates that you must enter a value in place of the brackets and text inside them. Indicates an optional parameter that you can enter in place of the brackets and text inside them. Indicates that you must select a parameter from the list of choices. Separates the mutually exclusive choices. Indicate a choice within an optional element. 2.2.2.1 Common Parameter Values Parameter values might be names (strings) or numbers. To use spaces as part of a name parameter, enclose the name value in double quotes. For example, the expression "System Name with Spaces" forces the system to accept the spaces. Empty strings (" ") are not valid user-defined strings. Table 2-2 describes common parameter values and value formatting. Table 2-2. Parameter Descriptions Parameter Description ipaddr macaddr This parameter is a valid IP address. You can enter the IP address in the following formats: a (32 bits) a.b (8.24 bits) a.b.c (8.8.16 bits) a.b.c.d (8.8.8.8) In addition to these formats, the CLI accepts decimal, hexidecimal and octal formats through the following input formats (where n is any valid hexidecimal, octal or decimal number): 0xn (CLI assumes hexidecimal format) 0n (CLI assumes octal format with leading zeros) n (CLI assumes decimal format) The MAC address format is six hexadecimal numbers separated by colons, for example 00:06:29:32:81:40. Overview 2-3 v1.0, December 2005