Netgear NTV200S NTV200S User Manual (PDF) - Page 10
Reset Button
View all Netgear NTV200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
NeoTV Streaming Player (NTV200S) Wireless Connection If you are using a wireless connection, place your player within range of your wireless network. For best wireless reception, avoid enclosing your player in a cabinet. To connect wirelessly, you can use Wi-Fi Protected Setup (WPS), or you can select your network and enter its password using the onscreen setup guide. NeoTV200 Wireless router Figure 3. Wireless network connection If you do not receive a strong signal during the onscreen setup, rotate your player or move it closer to your router. Reset Button There is Reset button on the bottom of the NeoTV Streaming Player. You can use the Reset button to go to standby mode. • Press Reset once and the NeoTV Streaming Player goes to standby mode. Press Reset again to wake up the NeoTV Streaming Player. • To reboot, press and hold Reset for 6 seconds. The unit power cycles. Getting Started 10