Netgear PTV2000 PTV2000 User Manual - Page 19

Push2TV HD TV Adapter for Intel® Wireless Display User Manual Initial Setup Adapter Power Does Not Turn On The On/Off button is located on the rear of the adapter. On/Off Figure 1. On/Off button If the adapter is not turning on, make sure the power cord is pushed all the way into both the wall outlet and the adapter. If power is not getting to the adapter, there might be a faulty power cord. Changing the TV Input Different TV brands have various methods of changing the TV input. Five of the most common processes are covered here. If these options do not cover your TV, consult your TV owner's manual for additional help. • Some TV remote controls have buttons labeled HDMI, HDMI 1, HDMI 2, A\V, and so on. Press the appropriate button to choose the TV input. • Other TV remote controls include a button labeled Input, Source, TV, or TV/Video. Press this button to cycle the TV through the input options. • Pressing the Input button on some remote controls results in a list of inputs on the TV screen. Simply select the input that you want. • You select the input on some TVs by pressing the Input button on the front or side panel of the TV screen. Simply press the button until the input that you want is selected. • Sometimes the inputs are located beneath the regular channels on the TV. Try selecting the lowest TV channel and then go down one channel. Adapter Encountered a Problem on Startup The adapter is experiencing technical difficulties. First turn the adapter off and back on again. If this does not resolve the issue, see Adapter Label on page 6. Chapter 3. Troubleshooting | 19