Netgear WG302v1 Application Notes - Point to Multi-Point Bridging
Netgear WG302v1 - ProSafe 802.11g Wireless Access Point Manual
 |
View all Netgear WG302v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear WG302v1 manual content summary:
- Netgear WG302v1 | Application Notes - Point to Multi-Point Bridging - Page 1
set up the access points: The layout for this example will be a WG302v2 as the MASTER Access Point, and two other WG302v2 as SLAVE units for two other buildings. All the devices must use the exact same settings, with the exception of their IP address; same SSID, same channel, same encryption, etc. - Netgear WG302v1 | Application Notes - Point to Multi-Point Bridging - Page 2
set and you've confirmed it to be working properly, go to the 'Access Point Settings' section and enable wireless bridging and repeating, select 'Wireless Point to Multi-Point Bridge' and enable Wireless Client Association (If you want stations to be able to connect to this particular access point) - Netgear WG302v1 | Application Notes - Point to Multi-Point Bridging - Page 3
this particular access point). In the 'Remote MAC Address' field insert the MAC address of the MASTER unit. TESTING - Verifying the connection: To verify this connection, try connecting wirelessly to the main unit and using the 'ping' DOS command to the IP address of the other access points. If the
-
1 -
2 -
3
 |
 |
WG302
–
Point-to-Multipoint Bridging: Use and Configuration
CONFIGURATION
–
How to set up the access points:
The layout for this example will be a WG302v2 as the MASTER Access Point, and two other
WG302v2 as SLAVE units for two other buildings.
All the devices must use the exact same settings,
with the exception of their IP address
; same
SSID, same channel, same encryption, etc.