Netgear WG302v1 WG302v1 Reference Manual - Page 64
Table 3-1. General Information Fields, Field, Description, Access Point Information
View all Netgear WG302v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual Table 3-1. General Information Fields Field Access Point Information Access Point Name (NetBIOS name) MAC Address Country/Region Firmware Version Access Point Mode VLAN(802.1Q) Management VLAN ID Current IP Settings IP Address Subnet Mask Default Gateway DHCP Client Description The default name may be changed if desired. Displays the Media Access Control address (MAC address) of the wireless access point's Ethernet port. Displays the domain or region for which the wireless access point is licensed for use. It may not be legal to operate this wireless access point in a region other than one of those identified in this field. The version of the firmware currently installed. Identifies the operating mode of the WG302: Access Point, Point-topoint bridge, Multi-point bridge or Repeater. Shows whether the VLAN feature is enabled or disabled. Default is disable. If VLAN has been enabled, the default VLAN address ID of "1" is entered to handle traffic and connections on the access point. (Cannot be configured by the user.) The IP address of the wireless access point. The subnet mask for the wireless access point. The default gateway for the wireless access point communication. Enabled indicates that the current IP address was obtained from a DHCP server on your network. Disabled indicated a static IP configuration. 3-6 Management v4.0, April 2006