Netgear WG302v1 WG302v1 Reference Manual - Page 87
Appendix A Factory Defaults and Technical Specifications, Factory Default Settings
View all Netgear WG302v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Appendix A Factory Defaults and Technical Specifications Factory Default Settings You can use the reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset. • To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the TEST LED blinks rapidly). Your device will return to the factory configuration settings shown in Table A-1 below. • Pressing the reset button for a shorter period of time will simply cause your device to reboot. Table A-1. Access Point Default Configuration Settings Feature AP Login User Login URL User Name (case sensitive) Login Password (case sensitive) Ethernet Connection Static IP Address Ethernet MAC Address Port Speed Local Network (LAN) Lan IP Subnet Mask Gateway Address DHCP Server DHCP Client Time Zone Description 192.168.0.228 admin password 192.168.0.210 See bottom label. 10/100 192.168.0.228 255.255.255.0 0.0.0.0 Disabled Disabled GMT A-1 v4.0, April 2006