Netgear WG602 WG602v3 User Manual - Page 61
Advanced Wireless Settings, WMM support, RTS Threshold
UPC - 606449030730
View all Netgear WG602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
NETGEAR 54 Mbps Wireless Access Point WG602v3 Reference Manual Switch Infrastructure Mode WG602v3 in Client Mode WG602v3 in AP Mode Switch Internet Router 192.168.0.1 PC1 Printer Figure 4-10 Server PC Printer Advanced Wireless Settings The default advanced wireless settings usually work well. These settings should not be changed unless you are sure it is necessary. • WMM support: WMM (Wireless Multimedia) is a subset of the 802.11e standard. WMM allows wireless traffic to have a range of priorities, depending on the kind of data. Timedependent information, like video or audio, will have a higher priority than normal traffic. For WMM to function correctly, Wireless clients must also support WMM. The default is Disable. (Not available in Client mode.) • RTS Threshold: Request to Send Threshold. The packet size that is used to determine if it should use the CSMA/CD (Carrier Sense Multiple Access with Collision Detection) mechanism or the CSMA/CA mechanism for packet transmission. With the CSMA/CD transmission mechanism, the transmitting station sends out the actual packet as soon as it has waited for the silence period. With the CSMA/CA transmission mechanism, the transmitting station sends out an RTS packet to the receiving station, and waits for the receiving station to send back a CTS (Clear to Send) packet before sending the actual packet data. The default is 2346. Advanced Configuration v1.0, August 2006 4-13