Netgear WGR614v7 WGR614v7 Reference Manual - Page 116
Configuring the Macintosh for TCP/IP Networking, MacOS 8.6 or 9.x, MacOS X
View all Netgear WGR614v7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
54 Mbps Wireless Router WGR614v7 Reference Manual • The default gateway is 192.168.1.1 4. Type exit Configuring the Macintosh for TCP/IP Networking Beginning with Macintosh Operating System 7, TCP/IP is already installed on the Macintosh. On each networked Macintosh, you will need to configure TCP/IP to use DHCP. MacOS 8.6 or 9.x 1. From the Apple menu, select Control Panels, then TCP/IP. The TCP/IP Control Panel opens: 2. From the "Connect via" box, select your Macintosh's Ethernet interface. 3. From the "Configure" box, select Using DHCP Server. You can leave the DHCP Client ID box empty. 4. Close the TCP/IP Control Panel. 5. Repeat this for each Macintosh on your network. MacOS X 1. From the Apple menu, choose System Preferences, then Network. C-18 April 2006 Preparing Your Network