Netgear WNR1000 WNR1000 User Manual - Page 77
Port Triggering Timeout, Service Name, Service User, Single address, Triggering Port, Connection Type
UPC - 606449062588
View all Netgear WNR1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
N150 Wireless Router WNR1000 User Manual 4. In the Port Triggering Timeout field, enter a value up to 9999 minutes. This value controls the inactivity timer for the designated inbound ports. The inbound ports close when the inactivity time expires. This is required because the router cannot be sure when the application has terminated. 5. Click Add. the Port Triggering-Services screen displays. Figure 5-5 6. In the Service Name field, enter a descriptive service name. 7. In the Service User field, select Any (the default) to allow this service to be used by any computer on the Internet. Otherwise, select Single address, and enter the IP address of one computer to restrict the service to a particular computer. 8. Select the service type, either TCP or UDP. 9. In the Triggering Port field, enter the number of the outbound traffic port that will cause the inbound ports to be opened. 10. Enter the inbound connection port information in the Connection Type, Starting Port, and Ending Port fields. Fine-Tuning Your Network v1.0, January 2009 5-11