Nextar ME ME Hardware Manual - Page 34

Troubleshooting - review

Page 34 highlights

Troubleshooting Before contacting customer service, review the steps below to solve simple problems. If you still suspect something wrong with this unit, immediately turn the power off, disconnect the power connector from the unit, and contact Nextar Customer Service. Never try to repair the unit yourself. Problem Unit will not Power Up Possible Cause Power adaptor is not connected properly Weak battery Possible Solution Check power adaptor connection Note: Some automobile accessory power jacks provide no power when the ignition is off. Charge battery No Sound Screen is difficult to see Volume may be turned down or muted Brightness may be turned down Check volume and mute condition Adjust brightness of the LCD screen 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

34
Troubleshooting
Before contacting customer service, review the steps below to solve
simple problems.
If you still suspect something wrong with this unit, immediately turn
the power off, disconnect the power connector from the unit, and
contact Nextar Customer Service. Never try to repair the unit
yourself.
Problem
Possible Cause
Possible Solution
Power adaptor is not
connected properly
Check power
adaptor connection
Note: Some
automobile
accessory power
jacks provide no
power when the
ignition is off.
Unit will not
Power Up
Weak battery
Charge battery
No Sound
Volume may be
turned down or
muted
Check volume and
mute condition
Screen is
difficult to
see
Brightness may be
turned down
Adjust brightness
of the LCD screen