Nextar X3B X3B Hardware Manual

Nextar X3B - Automotive GPS Receiver Manual

Get Nextar X3B - Automotive GPS Receiver PDF manuals and user guides
UPC - 714129930116
View all Nextar X3B manuals
Add to My Manuals
Save this manual to your list of manuals

Nextar X3B manual content summary:

  • Nextar X3B | X3B Hardware Manual - Page 1
    personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions. To reduce the risk of fire or electric shock, do not expose this apparatus
  • Nextar X3B | X3B Hardware Manual - Page 2
    of the ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
  • Nextar X3B | X3B Hardware Manual - Page 3
    Instructions product should not be used to determine ground proximity for aircraft navigation. This device complies with part 15 of the FCC Rules must accept any interference received, including interference that may cause undesired operation. The images in this manual are only for reference and
  • Nextar X3B | X3B Hardware Manual - Page 4
    Accessories Accessories List ITEM NAME Owner's Manual Power Adaptor Car Adaptor QTY 2 1 1 Mounting Bracket 1 USB Cable 1 Mounting cradle 1 Touch Pen 1 Dashboard mount disk 1 Pouch 1 NOTE Accessories and their parts numbers are subject to modification without prior notice due to
  • Nextar X3B | X3B Hardware Manual - Page 5
    Contents Important Safety Instructions Accessories View of Main Unit System Connections Power Supply Preparation General Setup Playing Music Photo Viewer Blue Tooth Function Use of the Mount Accessories Troubleshooting Specifications 1 4 6 8 10 12 16 19 21 29 30 32 5
  • Nextar X3B | X3B Hardware Manual - Page 6
    Hole Aim at the hole to speak when calling. 3. POWER button Press for a longer time to enter or exit the standby mode. 4. Card Port Insert the SD card into the port. 5. Headphone Jack Used to connect headphones for private listening. When the headphones are connected to this jack, the speaker will
  • Nextar X3B | X3B Hardware Manual - Page 7
    Bottom Panel View of Main Unit 7. USB Port Used to connect to the USB device. Rear panel 8. RESET button Press to reset the system. 9. GPS Antenna Jack Used to connect the external GPS antenna. 7
  • Nextar X3B | X3B Hardware Manual - Page 8
    connect external GPS antenna to receive GPS signals in the car when the signal is bad. One end is connected to the jack of the unit and the other one to be placed on the roof of the car and make it to be sucked by the car. Inserting SD Card The unit is designed with SD Card jack which
  • Nextar X3B | X3B Hardware Manual - Page 9
    System Connections Connecting to External USB Device The unit is designed with a USB port which allows you to connect the unit to PC for map updating. See the below figure for details: 1. You should install the driver into your PC first. 2. Turn on the unit. 3. Connect the unit to the PC with the
  • Nextar X3B | X3B Hardware Manual - Page 10
    figure. Attention Do not operate the unit while driving a vehicle. Place the unit in a proper position for viewing. Disconnect the unit from the Car Adaptor when starting the vehicle. Your portable GPS player comes with a built-in rechargeable battery. Please see details in the following segment. 10
  • Nextar X3B | X3B Hardware Manual - Page 11
    Power Supply Preparation About Rechargeable Battery Your portable GPS player comes with a built-in rechargeable battery. Charge the battery fully before initial use. Charging time is normally about 3.5 hours. A fully charged battery delivers about 3 hours of use. Working conditions and precautions
  • Nextar X3B | X3B Hardware Manual - Page 12
    main menu later as shown below: In the main menu, there are five items for selecting. Touch the corresponding item to enter. Tap to enter navigation mode; tap to enter Bluetooth mode; tap to enter the MP3 Player; tap to enter the Photo Viewer; tap to enter the settings menu. Settings
  • Nextar X3B | X3B Hardware Manual - Page 13
    time. There are 6 choices for sleep time (--/5/10/30/60/120). --: The system will keep backlight always on and will not enter sleep mode. 5: The system will keep backlight on for 5 minutes and then enter sleep mode. 10: The system will keep backlight on for 10 minutes and then enter sleep mode. 30
  • Nextar X3B | X3B Hardware Manual - Page 14
     buttons of Time group to change the corresponding time. Tap to return. Power Tap in the settings menu to enter Power menu for the current battery status, as shown below: The power menu will display the current
  • Nextar X3B | X3B Hardware Manual - Page 15
    General Setup Calibrate Tap in the settings menu to calibrate, the screen will display as below: This item is used to calibrate the sensitivity of the touch screen. Tap the center of "+" as it moves around the screen. If you touch the center of "+" every time, it will disappear and the screen
  • Nextar X3B | X3B Hardware Manual - Page 16
    is designed with SD card slot and supports MP3 and WMA format files playback. You can insert the SD card with MP3 or WMA files in the unit for music enjoyment. Note: Do not store MP3 or WWA format files in the Flash storage, for the flash storage is used to store map data, any attempt
  • Nextar X3B | X3B Hardware Manual - Page 17
    Playing Music Double tap the MMC_Storage icon to open the folder; the songs in the folder will be displayed on the screen. Select the songs that you want to add into the play list and tap the D to confirm. The songs selected will be added into the play list, as shown below: In the play list,
  • Nextar X3B | X3B Hardware Manual - Page 18
    Playing Music During playback, tap button to go to the previous track. During playback, tap button to go to the next track. During playback, tap button to pause playback, or in stop status, tap the button to resume playback. During playback, tap button to stop playback. During playback, tap button
  • Nextar X3B | X3B Hardware Manual - Page 19
    Photo Viewer The unit is designed with SD card slot and supports JPEG format files playback. You can insert the SD card with JPEG files in the unit for picture view. Note: Do not store JPEG format files in the Flash storage, for the flash storage is used to store map data, any attempt to open the
  • Nextar X3B | X3B Hardware Manual - Page 20
    Photo Viewer In the folders menu, tap , to move the folders list up or down; tap to return to the previous folders menu. Tap to play the selected picture or to enter the selected folder; you can also realize these functions by double tapping the item you want to play or enter. In the folders
  • Nextar X3B | X3B Hardware Manual - Page 21
    Bluetooth Function This unit is designed with bluetooth function. You can use it to realize the hand free function for a bluetooth hand phone. In the main menu, tap to enter the bluetooth menu, as shown below. In the Bluetooth menu, tap the Blue Tooth Manager In the Bluetooth menu, tap below.
  • Nextar X3B | X3B Hardware Manual - Page 22
    , as shown below: Use the keyboard to enter a random password, for example: 123. And then tap to send the password to the hand phone. After receiving the signal, a command to enter a passkey appears on the hand phone. Use the hand phone's keyboard to enter the same password. The screen will
  • Nextar X3B | X3B Hardware Manual - Page 23
    Bluetooth Function In the menu, the icon shows the unit and the selected hand phone have been paired off successfully. If necessary, tap button to break the bond. 3. Activate the BT profile After having paired off successfully, tap button in the Bluetooth Manager menu to search profiles of
  • Nextar X3B | X3B Hardware Manual - Page 24
    Bluetooth Function You can also use the Shortcut command to display recent activated profiles and make a recent profile active or inactive conveniently. In the Bluetooth Manager menu, tap the Shortcut command and the screen will display as below: In the menu, tap active; tap the / toggle button
  • Nextar X3B | X3B Hardware Manual - Page 25
    Bluetooth Function In the menu, tap the yellow square to select or cancel these commands; tap button to save your setting; tap button to cancel it. Current Active Profiles Tap button in the Bluetooth Manager menu to enter Active Connection menu that displays the current active profiles, as
  • Nextar X3B | X3B Hardware Manual - Page 26
    Bluetooth Function Use the keyboard to enter a phone number, and then tap screen will show as below: button to dial it; the In the Talking menu, tap , buttons to adjust the volume level; tap button to turn off the speaker; tap button to hang up; tap button to return to the blue tooth main
  • Nextar X3B | X3B Hardware Manual - Page 27
    Bluetooth Function In the phone book, tap ▲,▼ buttons to move up or down the list of phone number; tap button to call the selected number directly. Tap button to delete the selected phone numbers; tap button to return to the previous menu. Tap button to add a number to the phone book, the
  • Nextar X3B | X3B Hardware Manual - Page 28
    Call Record In the Bluetooth menu, tap button to display recent call notes, as shown below. In the menu, tap button to display recent received calls; tap button to display recent dialed numbers; tap the button to display recent missed calls. Tap button to delete the selected note; tap
  • Nextar X3B | X3B Hardware Manual - Page 29
    mount accessories (mount bracket and mount cradle) to mount the unit in the vehicle. Take the following steps to operate: 1. See Fig. 1. According to the arrow to slide the mount cradle to fix it to the mount navigation system. Warning: The device must not be mounted so that it impairs the driver's
  • Nextar X3B | X3B Hardware Manual - Page 30
    Troubleshooting Take steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong with this unit, immediately turn the power off and disconnect the power connector from the unit. Never try to repair
  • Nextar X3B | X3B Hardware Manual - Page 31
    Troubleshooting PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION The unit can receive signals now but can't then or signals received are not stable. The built-in rechargeable battery is weak. Use the adaptor to supply power or charge the battery. The unit may be obstructed by veil, such as heat
  • Nextar X3B | X3B Hardware Manual - Page 32
    Specifications TFT screen size Frequency Response Audio Signal-to-noise Rate Audio distortion+noise Channel Separation Dynamic Range Power Power Consumption Dimensions Weight 3.5 inches 20Hz～20kHz ≥65dB ≤－20dB (1kHz) ≥70dB (1kHz) ≥80dB (1kHz) AC 100-240V ～ 50/60Hz DC 5V < 8W 100mmX76mmX22mm
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
1
，
POWER SUPPLY:
Connect the supplied adapter to the side of the unit in the slot marked “DC 5V IN”. Plug
the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty
inserting the plug, turn it over and reinsert it. If the unit will not the used for a long time,
disconnect the plug from the outlet.
NOTE:
Before plugging the power cord into an AC outlet, make sure that all the connections
have been made.
CAUTION:
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
Refer to service manual for servicing instructions. To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.
Important Safety
Instructions