Nikon D2H D2H User's Manual - Page 124

Taking Photographs-Flash Photography The following Speedlights can be used in non-TTL auto and manual modes. If they are set to TTL, the camera shutter-release button will lock and no photographs can be taken. Flash mode Speedlight SB-28 SB-261 SB-272 SB-25 SB-24 SB-233 SB-293 SB-21B3 SB-29S3 SB-30 SB-22S SB-22 SB-20 SB-16B SB-114 SB-15 SB-144 A Non-TTL auto - ✔ ✔ Manual ✔ ✔ ✔ M FP high-speed sync ✔5 - ✔5 - - -- Repeating flash - -- REAR Rear-curtain sync ✔ ✔ ✔ Red-eye reduction - -- 1 The SB-26 can be set to slave mode for wireless slave flash photography. When the wireless slave selector is set to D, shutter speed will be set to under ½00 s. 2 When an SB-27 is mounted on the D2H, the flash mode is automatically set to TTL, and the shutter-release will be disabled. Set the SB-27 to A (non-TTL auto flash). 3 Autofocus is only available with AF-Micro lenses (60 mm, 105 mm, 200 mm, or 70-180 mm). 4 When using the SB-11 or SB-14 in A or M mode, use the SU-2 with an SC-13 sync cable. Although SC-11 and SC-15 sync cables can be used, the flash-ready indicator will not appear in the viewfinder and shutter speed will not be adjusted automatically. 5 FP high-speed sync must be selected manually. Use Only Nikon Flash Accessories Use only Nikon Speedlights. Negative voltages or voltages over 250 V applied to the accessory shoe could not only prevent normal operation, but damage the sync circuitry of the camera or flash. Before using a Nikon Speedlight not included in the list on these pages, contact a Nikon-authorized service representative for more information. ISO Auto If a Speedlight is used when Custom Setting b1 (ISO auto) is on, sensitivity (ISO equivalency) will be fixed at the value selected by the user. 112