Nikon D3s Body Only User Manual - Page 178

5 Check the results. If the camera was able to measure a value for white balance, C will flash in the control panels, while the viewfinder will show a flashing a. At default settings, the displays will flash for about six seconds. Top control panel Rear control panel Viewfinder If lighting is too dark or too bright, the camera may be unable to measure white balance. A flashing b a will r appear in the control panels and viewfinder (at default settings, the displays will flash for about six Top control panel seconds). Press the shutter-release button halfway to return to Step 4 and measure white balance again. Rear control panel Viewfinder 6 Select preset d-0. If the new value for preset white balance will be used immediately, select preset d-0 by pressing the WB button and rotating the sub-command dial until d-0 is displayed in the rear control panel. 152