Nikon D3s Body Only D3S User's Manual - Page 426
Release, AF-S priority, selection, Flicker reduction, sensitivity movie mode, Set Picture Control
UPC - 018208254668
View all Nikon D3s Body Only manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 426 highlights
Photos not recorded in live view mode: • Sound of mirror clicking down when shutter-release button was pressed halfway in hand-held mode was mistaken for sound of shutter (0 63). • Unless Release is chosen for Custom Setting a2 (AF-S priority selection), shutter release is disabled if camera is unable to focus when focus mode S is selected in hand-held mode (0 63, 296). Flicker or banding appear during live view or movie recording: Choose an option for Flicker reduction that matches the frequency of the local AC power supply (0 330). Bright bands appear during live view or movie recording: A flash or other light source with brief duration was used during live view or movie recording. Highlights are "washed out" in movies or the live view display: Select Off for Highsensitivity movie mode (0 72). Noise (randomly-spaced bright pixels, fog, or lines) appears in photos: • Choose lower ISO sensitivity or use high ISO noise reduction (0 110, 291). • Shutter speed is slower than 1 s: use long exposure noise reduction (0 291). • Reddish areas or other artifacts appear in long time-exposures: turn long exposure noise reduction on when shooting at a shutter speed of "A" (0 291). Photos are blotched or smeared: • Clean lens. • Clean low-pass filter (0 378). Colors are unnatural: • Adjust white balance to match light source (0 150). • Adjust Set Picture Control settings (0 170). Can not measure white balance: Subject is too dark or too bright (0 160). Image can not be selected as source for preset white balance: Image was not created with D3S (0 164). White balance bracketing unavailable: • NEF (RAW) or NEF+JPEG image quality option selected for image quality (0 83). • Multiple exposure mode is in effect (0 207). n 400