Nikon D500 Users Manual - English for customers in Asia Oceania the Middle Eas - Page 198

6 Check the results. If the camera was able to measure a value for white balance, C will flash in the control panel, while the viewfinder will show a flashing a. Press the shutter-release button halfway to exit to shooting mode. If lighting is too dark or too bright, the camera may be unable to measure white balance. A flashing b a will appear in the control panel and viewfinder. Press the shutter-release button halfway to return to Step 5 and measure white balance again. Control panel Viewfinder Control panel Viewfinder D Direct Measurement Mode If no operations are performed during viewfinder photography while the displays are flashing, direct measurement mode will end in the time selected for Custom Setting c2 (Standby timer, 0 296). A Protected Presets If the current preset is protected (0 179), 3 will flash in the control panel and viewfinder if you attempt to measure a new value. 172