Nikon D7200 Product Manual - Page 147
Check the results., Direct Measurement Mode, Selecting a Preset
View all Nikon D7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
6 Check the results. If the camera was able to measure a value for white balance, C will flash in the control panel, while the viewfinder will show a flashing a. Press the shutter-release button halfway to exit to shooting mode. Control panel If lighting is too dark or too bright, the camera may be unable to measure white balance. A flashing b a will appear in the control panel and viewfinder. Press the shutter-release button halfway to return to Step 5 and measure white balance again. Viewfinder Control panel Viewfinder D Direct Measurement Mode If no operations are performed during viewfinder photography while the displays are flashing, direct measurement mode will end in the time selected for Custom Setting c2 (Standby timer, 0 279). A Selecting a Preset Selecting Preset manual for the White balance option in either of the shooting menus displays the dialog shown at right; highlight a preset and press J. If no value currently exists for the selected preset, white balance will be set to 5200 K, the same as Direct sunlight. 123