Nikon D7200 Product Manual - Page 194

A HDMI To use live view when the camera is connected to an HDMI-CEC device, select Off for HDMI > Device control in the setup menu (0 292). A Wireless Remote Controllers and Remote Cords If Record movies is selected for Custom Setting g4 (Assign shutter button, 0 288) and the live view selector is rotated to 1, the shutterrelease buttons on optional wireless remote controllers (0 160, 319) and remote cords (0 319) can be used to start live view and to start and end movie recording. D Recording Movies Movies are recorded in the sRGB color space. Flicker, banding, or distortion may be visible in the monitor and in the final movie under fluorescent, mercury vapor, or sodium lamps or with subjects that are in motion, particularly if the camera is panned horizontally or an object moves horizontally at high speed through frame (for information on reducing flicker and banding, see Flicker reduction, 0 290). Jagged edges, color fringing, moiré, and bright spots may also appear. Bright regions or bands may appear in some areas of the frame with flashing signs and other intermittent light sources or if the subject is briefly illuminated by a strobe or other bright, momentary light source. Avoid pointing the camera at the sun or other strong light sources. Failure to observe this precaution could result in damage to the camera's internal circuitry. Flash lighting can not be used. Recording ends automatically if the mode dial is rotated. 170