Nikon F80QD User Manual - Page 54

Specifications-continued Shutter Release terminal Shutter speeds Sync contact Built-in Speedlight Flash control Flash sync mode Ready-light Accessory shoe Self-timer Depth-of-field preview button Film loading Electronically controlled vertical-travel focal-plane shutter Available on the shutter release button • In ¡, £: 30 to 1/4000 sec. • In ™: 30 to 1/4000 sec. (in 1/2 steps) • In ¢: 30 to 1/4000 sec. (in 1/2 steps), buLb X-contact only; flash synchronisation up to 1/125 sec. Activated by pressing Speedlight lock-release button, guide number: 12 (at ISO 100, m); flash coverage: 28mm or longer lens; film speed range: ISO 25 to ISO 800 Controlled by five-segment TTL Multi Sensor • Automatic Balanced Fill-Flash with TTL Multi Sensor: 3D Multi-Sensor Balanced Fill-Flash and Multi-Sensor Balanced Fill-Flash • Standard TTL • Film speed range: ISO 25-1000 * See pages 78-79 and 86-87 for details. Front-Curtain Sync (normal sync), Red-Eye Reduction, Red-Eye Reduction with Slow Sync, Slow Sync, Rear-Curtain Sync Lights up when flash fully charged with built-in Speedlight, SB-80DX, SB-50DX, SB-30, SB-29s/29, SB-28/28DX, SB-27, SB-23, etc.; blinks (3 sec. after flash) for full output warning Standard ISO-type hot-shoe contact (sync contact, ready-light contact, TTL auto flash contact, monitor contact, GND), safety lock provided Electronically controlled; timer duration: 10 sec. Stop-down lens aperture by pressing depth-of-field button Film automatically advances to first frame when camera back is closed (shutter and reflection mirror not activated) 106 Film advance Film rewind Multiple exposure LCD panel information (illuminator built-in) Date/time imprint function (F80D/F80S only) Shooting data imprint function (F80S only) Camera back Power source Power switch Exposure meter Battery power confirmation • Automatic advance with built-in motor; ı, ˜ selectable • Film advance speed (with Manual focus, Manual exposure mode, shutter speed 1/125 sec. or faster [imprint data between film frames not selected for F80S], 36-exposure film) ı: One frame advance ˜: Continuous shooting Approx. 2.5 fps (fresh batteries) • Automatic rewind with built-in motor • Rewind speed with 36-exposure film and fresh batteries: High-speed film rewind: approx. 15 sec., Quiet film rewind: approx. 23 sec. Activated using film advance mode dial DX indication, shutter speed/exposure compensation value, aperture, exposure compensation, flash exposure compensation, Auto Exposure Bracketing, Bracketing bar graphs, Custom, Flexible Program, flash sync mode, AF Area mode, focus area, battery power, frame counter Built-in clock: 24-hour type with timing accuracy within ±90 seconds a month; leap year adjustment until 2049 Usable film: ISO 32 to 3200 DX-coded film Display mode: Year/Month/Day, Day/Hour/Minute, No Imprint, Month/Day/Year and Day/Month/Year Selected/cancelled with shooting data imprint dial Imprinted data: Shutter speed, aperture and exposure compensation value (selected compensation value) Imprinted location: Between film frames Hinged back with film confirmation window; AF Area mode selector, focus area selector F80D/F80S: Data imprint LCD panel/buttons F80S: Shooting data imprint dial Two CR123A or DL123A lithium batteries; optional Battery Pack MB-16 is also available (for four AA-type alkaline-manganese, lithium, NiCd or Ni-MH batteries) Power ON and OFF position Auto meter shut-off 6 sec. after power turned on if no operations are performed; activated by lightly pressing shutter release button after power is turned on In LCD panel, with exposure meter on • N for sufficient power • M indicates batteries are nearing exhaustion • Blinking M indicates batteries are just about exhausted 107 Miscellaneous