Nokia DCV-15 User Guide - Page 50

Advanced features Saving calling card information 1 Press Menu 4-1-7 (Settings > Call settings > Calling card). 2 Enter your security code, then press OK. For more information on security codes, see "Security code" on page 58. 3 Scroll to one of the four memory locations, then press Options. Scroll to Edit, then press OK. 4 Select Dialing sequence. Dialing sequence Access number + phone number + card number Access number + card number + phone number Prefix + phone number + card number Use for cards that require you to: Dial 1-800 access number, phone number, then card number (+ PIN if required) Dial 1-800 access number, card number (+ PIN if required), then phone number Dial the prefix (numbers that must precede the phone number) and phone number you want to dial, then card number (+ PIN if required) 5 Scroll to one of the three sequence types as described in the following table, then press Select. Enter the required information (access number or prefix and card number). 6 Press OK to confirm your entries. Press OK to save your changes. 7 Scroll to Card name, then press Select. Enter the card name, then press OK. Note: This procedure might not work with all calling cards. Please look at the back of your calling card or contact your long distance company for more information. Choosing a calling card to use Use Menu 4-1-7 (Settings > Call settings > Calling card) to select a calling card to use. You will be required to enter your security code. Making calling card calls After you have saved your calling card information in your phone, you can make a call using your calling card. 1 Enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions. 2 Press and hold the Send key for a few seconds until your phone displays Card call. Your phone displays Wait for tone, then press OK. 3 When you hear the tone or system message, press OK. 4 Your phone displays Wait for tone, press OK again. When you hear the tone or system message, press OK. 50