NordicTrack 1750 Treadmill English Manual - Page 22

HOW TO USE THE MAINTENANCE MODE The console features a maintenance mode that allows you to calibrate the incline and speed of the treadmill, restore factory defaults, calibrate the screen, update the console firmware, and view technical information. 1. Select the settings mode. See step 1 on page 20. 2. Select the maintenance mode. Press the Maintenance button in the lower right corner of the screen to enter the maintenance mode. minimum incline level and then return to the starting position. This will recalibrate the incline system. When the incline system is calibrated, press the Back button. IMPORTANT: Keep pets, feet, and other objects away from the treadmill while the incline is calibrating. In an emergency, pull the key from the console to stop the incline calibration. 4. Restore factory defaults. If necessary, press the Restore Defaults button to reset the firmware to the original factory firmware. This will erase all firmware updates that you have downloaded. Press the Begin button to restore the default firmware or the Cancel button to return to the maintenance mode. 3. Calibrate the incline system of the treadmill. Press the Calibrate Incline button. Then, press the Begin button to calibrate the incline or the Cancel button to return to the maintenance mode. If you press the Begin button, the treadmill will automatically rise to the maximum incline level, lower to the When the restoration is complete, the words PLEASE CYCLE POWER will appear in the grey box. Press the power switch on the treadmill frame into the off position. Wait for several seconds, and then press the power switch into the reset position. It may take a minute for the console to be ready for use. 22