NordicTrack 360 With Freemotion Technology English Manual - Page 10

15. See drawing 15a. Slide the Rear Shroud (15) 15a under the Top Cover (24). Attach the Top Cover (24) and the Front and Rear Shrouds (14, 15) to the Top Frame (12) with three M4 x 16mm Self-tapping Screws (99). See drawing 15b. Attach the Rear Shroud (15) to the Base (1) with an M4 x 16mm Self-tapping Screw (99). 15b 24 99 12 99 15 14 99 15 1 16. Attach the Backrest (18) to the Upright (3) with two M6 x 100mm Screws (113) and two M6 Washers (107). 16 18 3 113 107 113 107 17. Attach the Seat (19) to the Seat Frame (4) with 17 two M6 x 16mm Screws (87) and an M6 x 85mm Screw (85). 19 Set the Seat Frame (4) onto a set of posts on the Upright (3). 4 18. Attach the Bumper (115) to the Leg Developer (6) 18 with an M4 x 19mm Self-tapping Screw (100). Grease an M10 x 75mm Bolt (86). Attach the Leg Developer (6) to the Seat Frame (4) with the Bolt and an M10 Nylon Locknut (108). Do not overtighten the Nylon Locknut; the Leg Developer must pivot easily. 85 87 86 Grease 6 4 100 108 115 10