NordicTrack A2750 Pro Treadmill English Manual - Page 10

7. Attach the Base Cover (84) to the Base (94) with four #8 x 1/2" Screws (1). Be careful not 7 to overtighten the Screws. With the help of a second person, tip the treadmill so that the Base (94) is flat on the floor. 84 1 94 1 8. Set the console assembly face down on a soft surface to avoid scratching the console. 8 Identify the Right Handrail (79). Hold the Right Handrail near the console assembly. Route the console wire through the large holes in the top and bottom of the Right Handrail. Console 79 8 Wire 12 4 Set the Right Handrail (79) on the Console Frame (81). Start a 1/4" x 1/2" Patch Bolt (8) 9 with a 1/4" Star Washer (12) into the Right Handrail. Then, start two 5/16" x 1 1/2" Patch Bolts (4) with two 5/16" Star Washers (9) into the Right Handrail. Make sure that the console Console Assembly wire is not pinched. Do not tighten the three 81 Patch Bolts yet. Attach the Left Handrail (not shown) as described above. Note: There is not a wire on the left side. 10