NordicTrack A2750 Pro Treadmill English Manual - Page 11
If You Do Not Connect The Con
View all NordicTrack A2750 Pro Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
9. With the help of a second person, hold the sides of the console assembly and place the console assembly near the Right Upright (83) and the Left Upright (not shown). Do not lift the console assembly by the Right Handrail (79) or the Left Handrail (not shown). Connect the Upright Wire (85) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. 9 Console Assembly Console Wire 85 Wire Tie 83 79 Console Wire 85 10. Slide a Handrail Cover (77) onto the lower end of each Handrail (78, 79). Set the console assembly on the Left and Right Uprights (82, 83). At the same time, insert the lower end of the Handrails (78, 79) over the brackets on the Uprights. Be careful not to pinch any wires. Insert the excess wire into the Right Upright. Start four 5/16" x 3/4" Patch Bolts (5) with four 5/16" Star Washers (9) into the Uprights (82, 83). Then, start two 5/16" x 1 1/2" Patch Bolts (4) into the Uprights. Do not tighten the Patch Bolts yet. 10 Console Assembly 4 5 9 79 77 Bracket 83 4 5 9 77 Bracket 78 82 11