NordicTrack Asr 630 Elliptical User Manual - Page 10
sticker. Attach the Right Pedal to the Link Arm
 |
View all NordicTrack Asr 630 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10. Tip: Be careful not to pinch the wire harnesses during this step. 10 While another person holds the Console (11) near the Upright (10), connect the console wire harness to the Upper Wire Harness (65). 10 Attach the Console (11) to the Upright (10) with 11 four M4 x 16mm Screws (78). 65 78 Console Wire Harness 78 Avoid pinching the wire harnesses during this step 11. Orient a Link Arm (30) as shown. Identify the Right Pedal (35), which is marked with an "R" 11 sticker. Attach the Right Pedal to the Link Arm 35 with three M8 x 45mm Button Screws (90), three M8 Split Washers (97), and three M8 x 23mm Washers (31). Repeat this step for the Left Pedal (not 30 shown) and the other Link Arm (not shown). 31 31 97 97 90 10
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
10
11. Orient a Link Arm (30) as shown. Identify the
Right Pedal (35), which is marked with an “R”
sticker. Attach the Right Pedal to the Link Arm
with three M8 x 45mm Button Screws (90), three
M8 Split Washers (97), and three M8 x 23mm
Washers (31).
Repeat this step for the Left Pedal (not
shown) and the other Link Arm (not shown).
11
35
31
31
97
97
90
30
10.
Tip: Be careful not to pinch the wire har-
nesses during this step.
While another person holds the Console (11)
near the Upright (10), connect the console wire
harness to the Upper Wire Harness (65)
.
Attach the Console (11) to the Upright (10) with
four M4 x 16mm Screws (78).
10
78
78
Console Wire
Harness
11
10
Avoid pinching the
wire harnesses
during this step
65