NordicTrack Asr 630 Elliptical User Manual - Page 8

6. Tip: Be careful not to damage the Upper Wire Harness (65). Apply a generous amount of the included grease to the Upper Body Axle (71). Insert the Upper Body Axle into the Upright (10). Apply a small amount of grease to a Wave Washer (80). Slide the Wave Washer onto the left end of the Upper Body Axle (71). Identify the Left Upper Body Leg (24), which is marked with an "L" sticker, and orient it as shown. Slide the Left Upper Body Leg onto the left side of the Upper Body Axle (71). Attach the Left Upper Body Leg (24) to the Upper Body Axle (71) with an M8 x 19mm Patch Screw (86) and an M8 x 23mm Washer (31). Repeat this step for the Right Upper Body Leg (72). 6 86 31 24 65 Grease 71 80 10 Grease 31 80 86 72 7. Attach the Right Upper Body Arm (23) to the Right Upper Body Leg (72) with three M8 x 14mm Patch Screws (84) and three M8 Split Washers (97). Attach the Left Upper Body Arm (22) in the same way. 7 22 24 23 97 84 97 72 8