NordicTrack C1250 Treadmill English Manual - Page 17
How To Turn On The Power
View all NordicTrack C1250 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
HOW TO TURN ON THE POWER HOW TO SET UP THE CONSOLE IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console display or other electrical components. Plug in the power cord (see page 15). Next, locate the power switch on the treadmill frame near the power cord. Make sure that the switch is in the reset position. Reset IMPORTANT: The console features a display demo mode, designed to be used if the treadmill is displayed in a store. If the demo mode is turned on, the display will show a demo presentation after you plug in the power cord and press the power switch into the reset position, before you insert the key. To turn off the demo mode, see step 7 on page 26. Next, stand on the foot rails of the treadmill. Locate the clip at- tached to the key, and Clip slide the clip securely onto the waistband of your clothes. Then, in- Key sert the key into the console. IMPORTANT: In an emergency, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps back- ward; if the key is not pulled from the console, ad- just the position of the clip. Note: It may take a minute for the console to be ready for use. Before using the treadmill for the first time, set up your console. 1. Connect to a wireless network. See steps 1 and 2 on page 25 to connect to a wireless network. Then, touch the back button on the screen to return to the settings mode. An information box may appear to explain how to return to the settings mode. To hide this message in the future, touch the Donʼt Show Again checkbox. Then, touch the Continue button. 2. Calibrate the screen. First, select the maintenance mode (see steps 1 and 2 on page 27). Then, see step 6 on page 28 and calibrate the screen. 3. Calibrate the incline system. First, select the maintenance mode (see steps 1 and 2 on page 27). Then, see step 3 on page 27 and calibrate the incline system of the treadmill. 4. Check for firmware updates. See step 5 on page 27 and check for firmware updates. 5. Create an iFit Live account. Note: If you have already created an iFit Live account, proceed to step 6. See step 1 on page 25 to select the settings mode. Touch the globe button near the lower-left corner of the screen and then touch the iFit Live button. A box may appear with directions for navigating in the Internet browser. To hide this message in the future, touch the Donʼt Show Again checkbox. Then, touch the Continue button. Note: For information about navigating in the browser, see page 24. 17