NordicTrack C1650 Treadmill English Manual - Page 16

Carefully slide the Upright Crossbar 41, do not fully

Get NordicTrack C1650 Treadmill PDF manuals and user guides View all NordicTrack C1650 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

14. S et the console assembly on the brackets on the Handrails (86). Make sure not to pinch any wires. Attach the console assembly with the four 5/16" x 3/4" Screws (4) that you removed in step 10 and four 5/16" Star Washers (11); do not fully tighten the Screws yet. Next, insert the excess Upright Wire (81) into the console assembly. Then, pull the ties tight against the Upright Wire and cut off the ends of the ties. 14 86 11 4 Console Assembly 86 Ties 81 11 4 15. Attach the Pulse Crossbar (93) to the console assembly with four #8 x 1/2" Screws (1); start all four Screws, and then tighten them. Then, firmly tighten the four 5/16" x 3/4" Screws (4). 15 4 93 1 Console Assembly 4 1 16. Carefully slide the Upright Crossbar (41) between the Left and Right Uprights (89, 90). 16 Attach the Upright Crossbar with the four 5/16" x 3/4" Screws (4) that you removed in step 6 and four 5/16" Star Washers (11); start all four Screws, and then tighten them. 90 4 11 89 41 4 11 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
16
14.
Set the console assembly on the brackets on
the Handrails (86).
Make sure not to pinch any
wires.
Attach the console assembly with the four 5/16"
x 3/4" Screws (4) that you removed in step 10
and four 5/16" Star Washers (11);
do not fully
tighten the Screws yet.
Next, insert the excess Upright Wire (81) into
the console assembly. Then, pull the ties tight
against the Upright Wire and cut off the ends of
the ties.
14
86
Console
Assembly
4
4
81
Ties
86
11
11
15. Attach the Pulse Crossbar (93) to the console
assembly with four #8 x 1/2" Screws (1);
start all
four Screws, and then tighten them.
Then, firmly tighten the four 5/16" x 3/4"
Screws (4).
15
93
Console
Assembly
4
4
1
1
16
11
4
11
90
89
41
4
16.
Carefully slide the Upright Crossbar (41)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar with the four
5/16" x 3/4" Screws (4) that you removed in step
6 and four 5/16" Star Washers (11);
start all four
Screws, and then tighten them.