NordicTrack C5 Zl Instruction Manual - Page 8

5. Apply some of the included grease to the barrel of an M6 x 70mm Bolt Set (50). Orient the Handlebar (5) and the Upright (4) as shown. While a second person holds the Handlebar (5) near the Upright (4), insert the Extension Wire (59) upward through the Handlebar. Tip: Avoid pinching the Extension Wire (59). Attach the Handlebar (5) to the Upright (4) with the M6 x 70mm Bolt Set (50) and two M8 Washers (43). Then, attach the M6 x 60mm Bolt Set (51) through the lower bracket on the Handlebar (5). 5 51 59 50 43 5 Grease 43 50 51 4 Avoid pinching the Extension Wire (59) 6. While another person holds the Console (13) near the Handlebar (5), connect the console 6 wires to the Extension Wire (59), the Pulse Wire (61), and the Chest Pulse Wire (94). Insert the excess wire downward into the Handlebar (5) or upward into the Console (13). Tip: Avoid pinching the wires. Attach the Console (13) to the Handlebar (5) with four M4 x 16mm Screws (90). Console Wires 61 59 5 Avoid pinching the wires 13 94 90 90 8