NordicTrack C630 Treadmill English Manual - Page 15
If You Do Not Connect The Con, Become Damaged When You Turn
View all NordicTrack C630 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
12. W ith the help of a second person, hold the console assembly near the Handrails (86) (only one 12 side is shown). Connect the ground wire from the console assembly to the Console Ground Wire (58) on the Pulse Crossbar (93). See the inset drawing. Connect the Upright Wire (81) to the console wire. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Console Assembly Console Wire Ground Wire 81 58 86 93 Wire Tie Console Wire 81 13. S et the console assembly on the brackets on the Handrails (86). Make sure not to pinch any 13 wires. Attach the console assembly to the brackets on the Handrails (86) with the four 5/16" x 3/4" Screws (4) that you removed in step 9 and four 5/16" Star Washers (11); do not fully tighten the Screws yet. 86 Insert the excess Upright Wire (81) into the Right Upright (90). 81 11 4 90 Console Assembly 86 11 4 15