NordicTrack C630 Treadmill English Manual - Page 26

HOW TO CHANGE CONSOLE SETTINGS The console features a settings mode that allows you to view usage information, to personalize console settings, and to set up and manage a wireless network connection. 1. Select the settings mode. To select the settings mode, hold down the Stop button while inserting the key into the console and then release the Stop button. The settings mode will then appear in the display. The time display will show the total number of hours that the treadmill has been used. The distance display will show the total number of miles (or kilometers) that the walking belt has moved. 2. Navigate the settings mode menu. While the settings mode is selected, the matrix will display several optional screens. Press the decrease button next to the Enter button to select each of the optional screens. The lower section of the display will show instructions for the selected optional screen. Make sure to follow the instructions shown in the lower part of the display. 3. Change settings as desired.  Demo-The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, the word ON will appear in the matrix. To turn on or turn off the demo mode, press the Enter button.  Units-The selected unit of measurement will appear in the matrix. To change the unit of measurement, press the Enter button. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. Default Menu-The default menu will appear when you insert the key into the console or when you press the Home button. Press the Enter button repeatedly to select the manual main screen or the iFit screen as the default menu. Firmware Update-For the best results, regularly check for firmware updates. Note: The matrix will display NOT CONNECTED if the console is not connected to a wireless network. Press the Enter button to check for firmware updates using your wireless network. If an update is available, the update will begin automatically. IMPORTANT: To avoid damaging the treadmill, do not turn off the power while the firmware is being updated. The update may take several minutes. Note: Occasionally, a firmware update may cause your console to function slightly differently. These updates are always designed to improve your exercise experience. Default Settings-To restore the console to its factory default settings, press the Enter button. Note: The console will erase any information that you have saved in its memory. The WiFi-Normal option will allow you to set up a wireless network connection using the console. See step 4 for instructions.  IP Address-Displays the IP address of the console. 26