NordicTrack Cx 998 Elliptical English Manual - Page 21
Maintenance And Troubleshooting
View all NordicTrack Cx 998 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
MAINTENANCE AND TROUBLESHOOTING Inspect and properly tighten all parts of the elliptical exerciser regularly. Replace any worn parts immediately. For smooth operation of the elliptical exerciser, inspect Ramp and clean the ramp regularly using a soft cloth and mild Wheel detergent. Other parts of the elliptical exerciser can also be cleaned in this way. Keep liquids off the console. Never use abrasives or solvents. PULSE SENSOR TROUBLESHOOTING If the handgrip pulse sensor does not function properly, see step 5 on page 12. HOW TO CALIBRATE THE INCLINE SYSTEM If the elliptical exerciser's ramp does not function properly, press one of the 1 Step Ramp buttons; while the ramp is moving, unplug the power cord. When the power cord is plugged back in, the elliptical exerciser's incline system will automatically calibrate itself. During the calibration process, three dashes (- - -) will appear in the console display while the ramp moves to the highest position and then returns to the lowest position. HOW TO MOVE THE ELLIPTICAL EXERCISER Stand in front of the elliptical exerciser, hold the handlebars firmly, and place one foot against the ramp in the location shown below. Pull the handlebars until the elliptical exerciser can be moved on the front wheels, and carefully move the elliptical exerciser to the desired location. Then, place one foot against the ramp and lower the elliptical exerciser. Due to the size and weight of the elliptical exerciser, use extreme caution while moving and lowering it. Handlebars Place your foot here Wheel HOW TO LEVEL THE ELLIPTICAL EXERCISER If the elliptical exerciser rocks during use, turn one or both of the leveling feet under the rear stabilizer until the rocking motion is eliminated. Leveling Foot 21